Affiliate Disclosure: NonToxicFinder (Solved Labs LLC) may earn commissions on qualifying purchases at no extra cost to you through affiliate links on other pages of this site. This article is an educational explainer and contains no affiliate links. We are not affiliated with, endorsed by, or partnered with the Environmental Working Group.
VOCs (volatile organic compounds) are carbon-based chemicals that evaporate at room temperature, and most paints give some off as they dry.[1, 2] The EPA lists eye, nose and throat irritation, headaches and nausea among their effects, and organ damage at high exposures. On a can, VOCs are given in grams per liter (g/L). The federal limit for flat paint is 250 g/L; Southern California caps flat and nonflat paint at 50 g/L, so 50 or under is a low number, and "zero-VOC" paints list 0 g/L.[4, 5] For a nursery, choose a water-based interior paint listed at 0 g/L after tinting with a GREENGUARD Gold certificate, and ventilate for 2 to 3 days after painting.
What VOCs are and why paint has them
The EPA defines VOCs as "organic chemical compounds whose composition makes it possible for them to evaporate under normal indoor atmospheric conditions of temperature and pressure."[3] In paint they come mainly from the organic solvents in the formula, and as the coat dries they leave the film and go into the room's air. The EPA puts it plainly: "Paints, varnishes and wax all contain organic solvents."[1]
Interior paint comes in two families. The EPA calls water-based paints "latex" and oil-based paints "alkyd," and says that "in general, water-based paints will emit fewer chemicals and lower levels of chemical vapors," while "short-term exposure to solvents from alkyd paints can be significantly higher than from latex paints."[2] It also notes that "under normal temperature and humidity, most emissions occur during drying, in the first few days after painting."[2]
Are VOCs from paint harmful?
The EPA lists possible health effects of VOCs as a group: "Eye, nose and throat irritation; Headaches, loss of coordination and nausea; Damage to liver, kidney and central nervous system." It adds that some organics can cause cancer in animals and some are suspected or known to cause cancer in humans, and that indoor levels of many VOCs run up to ten times higher than outdoors.[1]
For paint specifically, the EPA's remodeling guidance says the ability of these chemicals to cause health effects "varies greatly" and depends on how much is in the air, how long a person is exposed, their age, existing medical conditions and individual susceptibility. Immediate symptoms some people report include eye, throat or lung irritation, headaches, dizziness and vision problems. Damage to the nervous system, liver and kidneys has been seen in professional painters exposed to high levels for long periods. The EPA's conclusion: "susceptible people, such as young children and individuals with breathing problems, should avoid paint vapors," and "pregnant women should avoid undertaking painting projects and should limit their time in freshly painted rooms, especially when oil-based paints are being used."[2]
One thing that confuses shoppers: the VOC limits on paint cans were written to control outdoor smog, not indoor air. The EPA says it regulates VOCs outdoors "mainly because of their ability to create photochemical smog," and that some compounds exempt from that definition, such as methylene chloride, "could pose serious health risks to exposed individuals if present indoors."[3] That is why an emissions test, covered below, tells you more about a nursery than the can number alone.
What VOC number counts as low
Every can sold in the U.S. must meet the federal limits in 40 CFR Part 59, set in 1998. Several states and air districts set much lower limits. Southern California's South Coast Air Quality Management District (SCAQMD) Rule 1113 sets some of the strictest, and paint data sheets commonly list compliance with it alongside other regional rules.[4, 5, 10]
| Benchmark | Flat wall paint | Eggshell, satin, semi-gloss (nonflat) | Primer | What it measures |
|---|---|---|---|---|
| Federal limit (40 CFR 59) | 250 g/L | 380 g/L | 350 g/L | VOC content in the can |
| SCAQMD Rule 1113 | 50 g/L | 50 g/L | 100 g/L | VOC content in the can |
| SCAQMD colorant limit | 50 g/L of colorant added at the point of sale | VOC content of the tint | ||
| "Zero-VOC" label | No legal threshold; strong data sheets list 0 g/L | The maker's claim | ||
| GREENGUARD Gold | Total VOCs 0.22 mg/m³ and formaldehyde 9 µg/m³ (7.3 ppb) in a modeled room | Emissions from the dried paint into air | ||
So a wall paint at 50 g/L or less is low by the strictest content rule in the country, and 0 g/L is as low as a can number goes. A paint that only meets the federal 250 g/L limit is legal, but it is not what "low-VOC" should mean to you.
Is zero-VOC really zero?
Not necessarily. Neither the federal rule nor Rule 1113 defines "zero-VOC" or "low-VOC."[4, 5] The FTC's Green Guides say a "free of" claim can be acceptable when a substance is present only at "an acknowledged trace contaminant or background level," has not been added on purpose and causes no material harm, and that what counts as a trace "requires a case-by-case analysis."[7] Three more things keep a zero-VOC can from meaning zero in the room:
- Exempt compounds are left out. The legal count excludes compounds the EPA has exempted because they do not form smog, even though some matter indoors.[3, 4]
- The water is left out too. The figure is grams of VOC per liter of paint "less water and less exempt compounds," so it is a formulation measure, not an air measurement.[4, 5]
- Tint is not in the base number (next section).
That is why the strongest label pairs a 0 g/L figure with an emissions certificate.
Does tint add VOCs back?
It can. The federal limits apply to the coating "excluding the volume of any water, exempt compounds, or colorant added to tint bases," and Rule 1113 requires the number printed on the can to exclude "any colorant added to the tint base."[4, 5] The number on a white tint base therefore does not describe a deep navy mixed from it. The more colorant a color needs, the more the colorant's own VOC content matters.
Rule 1113 also caps the tint itself: colorant added at the store to architectural paint may not exceed 50 g/L.[5] Some makers state the after-tint figure directly. Benjamin Moore's data sheet for Eco Spec Interior Latex Flat, for example, lists "VOC: Zero g/L" and "Zero VOCs and zero emissions, even after tinting," with its Gennex colorant system.[11] When a can or data sheet says only "zero VOC" with no mention of tint, ask the store to tint with the maker's zero-VOC colorant, or choose a lighter color that needs less of it.
VOC content vs emissions testing: where GREENGUARD Gold fits
A g/L number is what is in the can. An emissions test measures what a painted sample actually gives off into air, in a sealed chamber, after it has dried. The EPA notes that some VOC labels "are based on the VOCs emitted from the product into the indoor environment," while others "are based on the content of VOCs that are regulated to control the formation of photochemical smog outdoors."[3] For a nursery, the emissions test is the closer match to the question you are asking.
GREENGUARD Gold, run by UL Solutions, is an emissions certification that paint makers carry. UL says Gold limits emissions of more than 360 VOCs plus total chemical emissions and requires the California Department of Public Health (CDPH) chamber method, also called California Section 01350, and describes Gold as intended for products used in settings such as nurseries and schools.[6] Our explainer on what GREENGUARD Gold certification means covers the program across product types.
Paint does carry it. UL certificate 416366-420, which we read, certifies BEHR ECOMIX Interior Plant-Based Paint & Primer Flat to GREENGUARD Gold under UL 2818, tested as a wall finish by CDPH Standard Method V1.2-2017 in modeled classroom and office rooms. The certificate lists the Gold limits: total VOCs 0.22 mg/m³, formaldehyde 9 µg/m³ (7.3 ppb), total aldehydes 0.043 ppm, and each individual VOC below half of California's chronic reference exposure level or 1/100th of its workplace limit.[8] A certificate covers the named product and sheen only, and it has an expiration date, so the same brand's eggshell or a different line needs its own certificate. UL's SPOT directory (spot.ul.com) is where certificates are authenticated.
The EPA adds that indoor-air labels and certifications "are not standardized," so no single mark settles every question.[3] An emissions certificate plus a 0 g/L figure after tinting is the most complete picture a paint label can give you.
Which paint to buy for a nursery
Pick a paint that meets all four of these:
- Water-based (latex or acrylic) and labeled for interior use. The EPA says water-based paints emit fewer chemical vapors than alkyds, and not to use exterior paint indoors.[2]
- 0 g/L on the data sheet, or at least 50 g/L or less. Look on the can's VOC line or the maker's technical data sheet (TDS), which lists the figure and any SCAQMD compliance.[5, 11]
- A stated after-tint figure, or a zero-VOC colorant system. If the color you want needs a lot of colorant, this matters more.
- A current GREENGUARD Gold certificate for that exact product and sheen. The Behr ECOMIX Interior Flat above is one example we read. Behr, for one, posts its certificates as PDFs, and UL's SPOT directory confirms any certificate.[8]
Apply the same test to the primer, which has its own, higher limits (350 g/L federal, 100 g/L under Rule 1113), and skip oil-based trim enamel in the nursery; water-based enamels exist for trim and doors. The limits in the table treat flat and nonflat finishes separately, so compare a flat with a flat and an eggshell with an eggshell.
How long before the baby can sleep in the room?
The EPA's guidance gives the minimum: run fans and "provide as much ventilation as possible continuously (24 hours/day, 7 days/week) from the beginning of the painting work until 2 or 3 days after painting has been completed."[2] Its other steps for a nursery job:
- Someone other than the pregnant parent paints. The EPA says pregnant women should avoid painting projects and limit time in freshly painted rooms.[2]
- Paint when the home is empty if you can, and in spring or fall when windows can stay open.
- Exhaust, don't just circulate. Put a box fan in the window blowing out of the painted room, and block heating or cooling return vents in that room so fumes are not carried through the house (unless it is the only return and the system is running).
- Keep the baby and young children out while you paint and through the ventilation period, since the EPA says young children should avoid paint vapors.
So the earliest the baby should sleep in the room is after the last coat plus 2 to 3 days of continuous airing. Most emissions happen in those first few days of drying, and if the room still smells of paint, keep ventilating.[2] The easiest plan is to paint weeks before the due date, which leaves time for a second coat and the full airing window without a deadline. Once the walls are done, our guides to GREENGUARD Gold certified cribs and nursery rugs cover the next things that go into the room.
Should you worry about old lead paint when repainting?
Yes, if the home was built before 1978. The EPA's remodeling guidance says: "Unless a lead-based paint inspection shows it doesn't, you should treat paint in homes built before 1978 as if it contained lead."[2] The federal government banned lead paint for homes in 1978, and the EPA says about three-quarters of U.S. homes built before then still contain some.[9] Intact paint under a fresh coat is not the problem. Sanding, scraping and opening walls are, because they make lead dust. The CDC says no safe blood lead level in children has been identified.[12]
What the EPA advises for a pre-1978 nursery:[9, 13]
- Find out first. The EPA recommends a certified lead inspector or risk assessor to test the surfaces you will disturb. If you cannot tell, assume there is lead.
- Hire lead-safe certified. The EPA recommends homeowners hire a lead-safe certified contractor, and its Renovation, Repair and Painting (RRP) Rule requires certification for anyone paid to disturb paint in pre-1978 homes. The EPA has a contractor finder on its RRP page.
- If you do it yourself, seal the room with plastic, turn off forced-air heating and cooling, mist surfaces before sanding or scraping, use wet sanding sponges and a HEPA vacuum, wear a disposable N-100 respirator, and keep family members out until the area is cleaned. The EPA lists a heat gun only below 1,100°F; dry scraping, sanding and open-flame burning of lead paint are what create harmful exposures.[2, 13]
- Keep pregnant family members and children away from the work, since the dust settles on floors and sills where babies crawl.
Related guides on NonToxicFinder
- What GREENGUARD Gold certification means and how to check it
- GREENGUARD Gold nursery picks
- GREENGUARD Gold crib mattresses
- What are formaldehyde releasers?
- Plug-in air freshener alternatives
- What are phthalates and where they hide
Frequently asked questions
What does VOC stand for?
Volatile organic compounds: carbon-based chemicals that evaporate at room temperature. In paint they are mostly solvents and additives that leave the film as it dries.
What VOC level is considered low for paint?
50 g/L or less for flat and nonflat wall paint, which is the limit under Southern California's Rule 1113. The federal limits are 250 g/L for flat and 380 g/L for nonflat paint.
Is zero-VOC paint really zero?
Not necessarily. No federal rule defines "zero-VOC," the FTC allows "free of" claims where only a trace remains, and the legal count leaves out exempt compounds and tint. A data sheet that lists 0 g/L after tinting, plus a GREENGUARD Gold certificate, is the strongest evidence a label can give.
Does tint add VOCs?
It can. Federal and California figures exclude colorant added to the tint base, so a deep color can differ from the base number. Rule 1113 caps store-added colorant at 50 g/L, and some makers sell zero-VOC colorant systems.
Does GREENGUARD Gold cover paint?
Yes. Paints are certified to GREENGUARD Gold by emissions testing under the CDPH chamber method; for example, BEHR ECOMIX Interior Flat holds UL certificate 416366-420. Each certificate covers a named product and sheen.
How long should I wait before putting the baby in a freshly painted room?
At least until 2 to 3 days after the last coat, with fans running continuously the whole time, which is the EPA's ventilation guidance. Painting weeks before the baby arrives gives you room for a second coat and a longer airing.
Can I paint the nursery while pregnant?
The EPA advises against it: it says pregnant women should avoid painting projects and limit time in freshly painted rooms, especially with oil-based paint. In a home built before 1978, keep pregnant family members away from any sanding or scraping too; the EPA says to keep family members out of a lead work area.
Is water-based paint lower in VOCs than oil-based?
Generally, yes. The EPA says water-based (latex) paints emit fewer chemicals and lower levels of vapors, and that short-term solvent exposure from alkyd (oil-based) paints can be significantly higher.
References
- U.S. EPA. "Volatile Organic Compounds' Impact on Indoor Air Quality." Last updated June 23, 2026; read November 8, 2026. Source
- U.S. EPA. "Addressing Indoor Environmental Concerns During Remodeling" (Painting and Lead sections). Last updated July 6, 2026; read November 8, 2026. Source
- U.S. EPA. "Technical Overview of Volatile Organic Compounds." Last updated August 17, 2026; read November 8, 2026. Source
- 40 CFR Part 59, Subpart D, Table 1, "Volatile Organic Compound (VOC) Content Limits for Architectural Coatings," via Cornell Legal Information Institute; see also EPA, "Architectural Coatings: National Volatile Organic Compounds Emission Standards" (last updated March 4, 2026). Read November 8, 2026. Source · EPA rule page
- South Coast Air Quality Management District. Rule 1113, Architectural Coatings (amended February 5, 2016), Table of Standards 1 and 2 and labeling requirements. Read November 8, 2026. Source
- UL Solutions. "UL GREENGUARD Certification." Read November 8, 2026. Source
- Federal Trade Commission. Guides for the Use of Environmental Marketing Claims, 16 CFR 260.9, "Free-of claims," via Cornell Legal Information Institute. Read November 8, 2026. Source
- UL Verification Services. Certificate of Compliance 416366-420, BEHR ECOMIX Interior Plant-Based Paint & Primer Flat, GREENGUARD Gold (UL 2818-2022). Issued October 2, 2025; expires October 25, 2027. Read November 8, 2026. Source
- U.S. EPA. "Lead Renovation, Repair and Painting Program." Last updated June 17, 2026; read November 8, 2026. Source
- South Coast AQMD. Rule 1113 Advisory Notice, "Specification of Default Coating Category" (revised August 2018). Read November 8, 2026. Source
- Benjamin Moore. Technical Data Sheet, Eco Spec Interior Latex Flat (W373). Read November 8, 2026. Source
- Centers for Disease Control and Prevention. "About Childhood Lead Poisoning Prevention." August 21, 2025; read November 8, 2026. Source
- U.S. EPA. "Lead-Safe Renovations for DIYers." Last updated August 20, 2026; read November 8, 2026. Source
Affiliate Disclosure: NonToxicFinder (Solved Labs LLC) may earn commissions on qualifying purchases at no extra cost to you through affiliate links on other pages of this site. This article is an educational explainer and contains no affiliate links. We are not affiliated with, endorsed by, or partnered with the Environmental Working Group.

